TBS 8mm Setup

If you would like to retrofit your 192/250 TBS blower (192 w/medium snout only) setup to fit the all-new TBS 8mm pulleys, here are the parts you will need! Please call 208-985-7650 with any questions or to place an order. Not compatible with a Long Water Pump (LWP) on small block Chevy.

 

ImageNameSKUPriceBuy
BLACK 8MM TOP PULLEY FOR 192/250 TBS BLOWER
BLACK 8MM TOP PULLEY FOR 192/250 TBS BLOWER
TBS Idler Pulley Assembly (4" Diameter - 2" Wide) [#4102]
TBS Idler Pulley Assembly (4" Diameter - 2" Wide) [#4102]4102
192/250 8MM IDLER BRACKET W/3.75" STANDS [#4541]
192/250 8MM IDLER BRACKET W/3.75" STANDS [#4541]4541
192/250 8MM IDLER BRACKET W/4.75" STANDS [#4542]
192/250 8MM IDLER BRACKET W/4.75" STANDS [#4542]4542
1280 8MM 50 (2" WIDE) BELT (50.4") [#8141]
1280 8MM 50 (2" WIDE) BELT (50.4") [#8141]8102
1360 8MM 50 (2" WIDE) BELT (53.5") [#8143]
1360 8MM 50 (2" WIDE) BELT (53.5") [#8143]8103
8545 64 tooth 8mm bottom pulley
192/250 8MM 64 TOOTH BOTTOM PULLEY [#8545]8545
8545 64 tooth 8mm bottom pulley
192/250 8MM 67 TOOTH BOTTOM PULLEY [#8546]8546

BLACK 8MM TOP PULLEY FOR 192/250 TBS BLOWER

Additional information

Weight 3 lbs
TOOTH

29, 31, 33, 35, 37, 39, 41, 43